|
3KW permanent magnet synchronous steering pump assembly
Collect
Features High reliability Low noise and high safety Lightweight and small Double insulation design High degree of protection Scope of application New energy electric minibuses, large buses, electric buses, electric trucks, electric sanitation, electric logistics, etc.; wide coverage: the power ranges from 1kW-4kW, which can cover all the steering assist requirements of new energy vehicles. technical parameter
1. The steering oil pump assembly should meet the requirements of QC/T 299 "Technical Conditions for Automotive Power Steering Oil Pumps"; 2. No mechanical drive shock phenomenon is allowed when the assembly is working; 3. Measure the noise at a position 1000mm away from the front of the assembly. When running at no load, the assembly noise is less than 65dB; 4. The stay time when the steering wheel turns to the limit position is not allowed to exceed 10s, and the system does not allow over-current protection to stop; 5. There is a reliable grounding protection wire interface on the surface of the motor, which must be effectively grounded after installation; 6. The steering gear needs to be equipped with a stroke unloading valve, and the stroke opening pressure at the limit position of the direction is less than 5MPa; 7. When wiring, the phase sequence corresponds to the position of the plug-in unit. At this time, from the direction of the pump head, the direction of rotation of the motor is counterclockwise (left-handed), otherwise the direction of rotation of the motor is opposite, and the steering pump does not work. 8. Working environment temperature: -40¡æ+80¡æ; 9. The appearance is clean and tidy, free of foreign matter, dirt, damage and other defects, and the joint surface between the assembly and the parts is good, and there is no air leakage, no oil leakage, etc.; 10. Add dust cover to the oil inlet and outlet to prevent pollution during transportation and storage; 11. Install the damping pad with the assembly |